|
|
Post by forgotteng on Oct 12, 2022 18:13:30 GMT -6
I have a bunch of Blue Hummingbird mics and 1 of them the capsule got detached from the circuit board. I'm wondering if I could handle fixing this myself but I don't know where the leads go. Any wizards out there know where they connect or have the schematics?
|
|
|
|
Post by svart on Oct 12, 2022 19:45:01 GMT -6
I have a bunch of Blue Hummingbird mics and 1 of them the capsule got detached from the circuit board. I'm wondering if I could handle fixing this myself but I don't know where the leads go. Any wizards out there know where they connect or have the schematics? I opened one of mine to look for you The center wire in the coax goes to the node between the 1G resistor and the red capacitor under the hot glue. The shield of the coax goes to the through-hole on the tip of the PCB under the glue. |
|
|
|
Post by forgotteng on Oct 12, 2022 20:03:08 GMT -6
I have a bunch of Blue Hummingbird mics and 1 of them the capsule got detached from the circuit board. I'm wondering if I could handle fixing this myself but I don't know where the leads go. Any wizards out there know where they connect or have the schematics? I opened one of mine to look for you The center wire in the coax goes to the node between the 1G resistor and the red capacitor under the hot glue. The shield of the coax goes to the through-hole on the tip of the PCB under the glue. Outstanding. Thanks Svart. |
|
