How do I place my monitors?

Short answer carefully.

long answer: start with the equilateral triangle, listen, measure frequency response take notes, mark position move monitors repeat. Run with the position that’s the best compromise.

Most of this will apply to any brand of monitors:

www.genelec.com/monitor-placement
www.genelec.com/calibration-acoustics

If you want to get really serious use REW and a measurement mic to test different positions/treatments and refine:
www.roomeqwizard.com/

imgur.com/6Dpqyln

My lil' monsters hehe

Yeah, I figured it. I'll use my old K&M stands. I'll place biggies on a book, then yamm on top

Okay, so my room is very very good but I have come up with an idea. There extra storage space in front of my desk. Tight small room for extra stuff. Tiny storage room. Same diameters, all that. I could pretty utilize it into a wall mounting / soffit system. I was told that soffit mounting fixes bass problems tremendesly. Would it be very beneficial? I'm repeating myself 10x's of times, my speakers are designed to be soffit mounted, passive & all that. I would only need to do minor construction work, fill the space with some material, organize storage (mostly old stuff, pretty much garbage in the eyes of home ladies)


P.S. sommehow I feel most of my questions gets answered by eric

Not to argue with Bob, since he is way more experienced than me. (much respect)
But... I have found that in smaller spaces, I got a much flatter low end by putting the monitors as close to the front wall as possible, even for rear-ported speakers. Why is that so? It has to do with the 1/4 wave reflection off the front wall. Measure how far from the wall your woofer is. Double that and you have the 1/2 wave legnth. Look up what frequency is at that wavelegnth and you will know what your dip is going to be. Remember, the half wave will be exactly out of phase with the full wave. No matter what, you're going to have some dip in the frequency response. It could be anywhere from 80-120HZ. When my monitors were where they "theoritically" should have been, I had a 16dB dip at 80HZ. Pushing the monitors to the front wall moved the dip to 90HZ but that dip was now only 7dB. Play with the placement and do sweep tests to see what really going on. Then use room correction software to get you the rest of the way there. Smaller rooms are never going to be perfect but with absorption and room correction software, you can get the mix position close to flat. Then, all your EQ moves are going to translate onto other systems.

I guess we are going that route I just don't know what the main use of our facility will be :////