|
|
Post by svart on Oct 30, 2015 13:11:20 GMT -6
Hey Svart congrats on the product launch! I am curious as to what this A/D is like for printing mixes through, if I was looking for something a little coloured like the burl would this be a good option or no? Once again, many congrats! Sorry, I missed this. The design is clean for days. You can "push" the signal into the ADC pretty heavily and it'll get fuzzy before it finally starts getting crunchy. I'm thinking of doing a "color" box that has some transformers in it, with a novel way to create some distortion, that you can hook up before or after any device. I'll report more on this later. |
|
|
|
Post by kcatthedog on Oct 31, 2015 13:43:29 GMT -6
Could you post a finish pic with the specs back at the front page ?
Please and thank you !
|
|
|
|
Post by Johnkenn on Oct 31, 2015 14:54:56 GMT -6
Hey Svart congrats on the product launch! I am curious as to what this A/D is like for printing mixes through, if I was looking for something a little coloured like the burl would this be a good option or no? Once again, many congrats! Sorry, I missed this. The design is clean for days. You can "push" the signal into the ADC pretty heavily and it'll get fuzzy before it finally starts getting crunchy. I'm thinking of doing a "color" box that has some transformers in it, with a novel way to create some distortion, that you can hook up before or after any device. I'll report more on this later. OOOOO...I want one... |
|
|
|
Post by svart on Nov 1, 2015 8:48:26 GMT -6
Could you post a finish pic with the specs back at the front page ? Please and thank you ! The specs are already up on the first page, have been for a while now.. There are some pics in this thread of the box too.. |
|
|
|
Post by kcatthedog on Nov 1, 2015 8:59:08 GMT -6
yes I know but searching for the final pic is a bit tedious, ok call me lazy but I stopped after about 6 screens yesterday  |
|
|
|
Post by kcatthedog on Nov 1, 2015 9:13:28 GMT -6
there are pics starting around 29 but I don't see the final pic: I remember seeing a pic of the complete finished unit like all 10 stacked is that on the other thread ?
|
|
|
|
Post by svart on Nov 1, 2015 9:15:37 GMT -6
there are pics starting around 29 but I don't see the final pic: I remember seeing a pic of the complete finished unit like all 10 stacked is that on the other thread ? Honestly I lost track of what is where. Each thread was meant to contain specific information but that only lasted a couple days until each thread got so off-track... Anyway, I don't have any "professional" pics of the unit. That'll happen soon though. |
|
|
|
Post by kcatthedog on Nov 1, 2015 10:08:23 GMT -6
understood, a friend is thinking about ordering one so naturally asked for info. I sent the specs and they asked for pics. here are the ones I found back around 30:    |
|
|
|
Post by jcoutu1 on Nov 1, 2015 10:21:37 GMT -6
|
|
|
|
Post by kcatthedog on Nov 1, 2015 10:29:14 GMT -6
The lava lamp tells me your pro, who cares about the rest |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 1, 2015 11:28:11 GMT -6
Hey Svart congrats on the product launch! I am curious as to what this A/D is like for printing mixes through, if I was looking for something a little coloured like the burl would this be a good option or no? Once again, many congrats! Sorry, I missed this. The design is clean for days. You can "push" the signal into the ADC pretty heavily and it'll get fuzzy before it finally starts getting crunchy. I'm thinking of doing a "color" box that has some transformers in it, with a novel way to create some distortion, that you can hook up before or after any device. I'll report more on this later. I badly need another 8 outputs for my summing mixer too, but I'm not sure what to grab for that. |
|
|
|
Post by Johnkenn on Nov 1, 2015 12:21:09 GMT -6
Posted a pic in the first thread.
|
|
|
|
Post by deehope on Nov 1, 2015 16:27:32 GMT -6
When I get my svartbox I'm going to use it with the upcoming Zulu tape saturation box. Best of both worlds
|
|
|
|
Post by Johnkenn on Nov 1, 2015 18:26:22 GMT -6
Hmm...gonna have to look that up.
|
|
|
|
Post by svart on Nov 2, 2015 8:00:02 GMT -6
loloStarting another batch now. I should have a few left for open orders after satisfying the last of the list.
|
|
|
|
Post by svart on Dec 2, 2015 7:47:28 GMT -6
Ok, an update!
I've just now been supplied with some parts that were supposed to be delivered a month ago..
I've also gone through 3 different board assemblers, two who quoted me outrageous prices and one whom I cut ties after seeing their work..
So I guess I'm back to doing these myself for this next batch.
In any case, the batch has been delayed a month from when i thought it would be done and it'll be after xmas before it ships.
|
|
|
|
Post by kcatthedog on Dec 2, 2015 8:00:52 GMT -6
Wel its your name NOT on the box so you want to get it right ! |
|
|
|
Post by mokobigbro on Dec 7, 2015 12:18:33 GMT -6
I'm in! Where do I sign up?
|
|
|
|
Post by svart on Dec 7, 2015 12:26:30 GMT -6
No sign up right now. I'm going to fill the remaining orders soon, and then move on to open orders, first come, first served!
I should have an update in a few days, I'm testing out a new option for building PCBs that hopefully will make this all go faster.
|
|
|
|
Post by Johnkenn on Dec 7, 2015 12:26:37 GMT -6
I would PM Svart
|
|
|
|
Post by svart on Dec 7, 2015 12:28:31 GMT -6
Actually, No. I've gotten so many PMs that i'd rather just keep it all in these threads. I can't possibly respond to all the PMs and emails I keep getting! |
|
|
|
Post by Johnkenn on Dec 7, 2015 12:29:05 GMT -6
DOH...I stand corrected.
|
|
|
|
Post by svart on Jan 11, 2016 8:55:16 GMT -6
Ok, so production is underway, I expect 3 weeks until first units ship depending on the PCB builder.
I'm also getting a small solder oven to see if I can parallel some building to speed things up.
|
|
|
|
Post by Johnkenn on Jan 17, 2016 21:51:44 GMT -6
Woohoo!
|
|
|
|
Post by mokobigbro on Jan 20, 2016 4:34:06 GMT -6
I am bored with my avid 8x8x8 io. I want this! |
|
