|
|
Post by gouge on May 7, 2018 14:12:03 GMT -6
Awesome. Dont forget the neve switch
|
|
|
|
Post by svart on May 7, 2018 14:44:51 GMT -6
Awesome. Dont forget the neve switch The what? |
|
|
|
Post by gouge on May 7, 2018 15:54:50 GMT -6
Awesome. Dont forget the neve switch The what? It was an attempt at humour |
|
|
|
Post by matt@IAA on May 7, 2018 16:48:27 GMT -6
I hear you can get the same effect by whispering marinair over your solder.
|
|
|
|
Post by bram on May 7, 2018 21:34:29 GMT -6
I'm interested in a set if there are still some available. *thumbs up*
|
|
|
|
Post by svart on May 8, 2018 6:54:23 GMT -6
I'm interested in a set if there are still some available. *thumbs up* Judging by the folks who've responded, I think first 5 are spoken for, but if there's more interest I'll build another 4 or 5 in a few weeks. I just can't lay out close to 2K$ for parts in one go so I'll have to break this up into two batches. |
|
|
|
Post by svart on May 8, 2018 6:56:33 GMT -6
I hear you can get the same effect by whispering marinair over your solder. I had a set of Marinair in my first Neves. Now I have Carnhill in one set and Hairball in my 33609.. Can't really tell the difference to be honest. |
|
|
|
Post by svart on May 8, 2018 7:02:51 GMT -6
So a serious question.. Which dial markings do you prefer?  |
|
|
|
Post by gouge on May 8, 2018 7:08:57 GMT -6
Numbers are good for me
|
|
|
|
Post by jcoutu1 on May 8, 2018 7:10:50 GMT -6
So a serious question.. Which dial markings do you prefer? Bottom row, far right. Star in circle. Chicken head knobs. Or, dots with the biggest bakelite knobs you can find, in a flat black, 5U case. |
|
|
|
Post by svart on May 8, 2018 7:35:51 GMT -6
So a serious question.. Which dial markings do you prefer? Bottom row, far right. Star in circle. Chicken head knobs. Or, dots with the biggest bakelite knobs you can find, in a flat black, 5U case. LOL, srsly? That'd be like 99% air in that case.. They're going in 1U x 8" chassis.. Even then I could have probably fit 8 channels if I had laid these out a little more narrow. I have some grey with blue insert knobs that give a little of the grey/blue SSL look.. |
|
|
|
Post by svart on May 8, 2018 7:36:27 GMT -6
I'm kinda partial to the second from the right on the star row.
|
|
|
|
Post by svart on May 8, 2018 8:06:46 GMT -6
Click the tiny pic to see some of the dials on the front panel:  |
|
|
|
Post by jcoutu1 on May 8, 2018 8:56:22 GMT -6
I'm kinda partial to the second from the right on the star row. I dig that one. |
|
|
|
Post by svart on May 8, 2018 9:07:20 GMT -6
I'm kinda partial to the second from the right on the star row. I dig that one. The one on the far right of my test panel pic? |
|
|
|
Post by svart on May 8, 2018 9:08:05 GMT -6
The one on the far right of my test panel pic? I've got a vote for the dots, and I like the little bars. Not sure about the numbers though.. |
|
|
|
Post by jcoutu1 on May 8, 2018 9:09:27 GMT -6
The one on the far right of my test panel pic? Yes. Speaking of empty cases...seen the SHMC?  |
|
|
|
Post by mdmitch2 on May 8, 2018 9:28:30 GMT -6
I like the dots or the one on the right in your mock up.
|
|
|
|
Post by svart on May 8, 2018 9:35:54 GMT -6
The one on the far right of my test panel pic? Yes. Speaking of empty cases...seen the SHMC? They have to have a huge faceplate for all those knobs |
|
|
|
Post by svart on May 10, 2018 9:12:24 GMT -6
Ok, PCBs ordered. I'm trying out a new PCB house which is supposed to be faster and cheaper than who I've been using and gets decent reviews, so we'll see..
Hopefully I won't get shit boards.
Got the first batches of parts in yesterday. One place sent me substituted transformers, which of course are physically bigger and now too big for the chassis, so I need to return them and see if they have anything that will fit..
|
|
|
|
Post by svart on May 13, 2018 17:23:04 GMT -6
Looks like the boards are in production. Should maybe be the end of the week when they arrive, or early next week at the latest.
Looks like I also got most of the parts and I started on the chassis cutting the hole for the power inlet.
I need to finish the overlay for the front and back and send those off to be printed soon.
|
|
|
|
Post by svart on May 14, 2018 11:48:41 GMT -6
How about this?  |
|
|
|
Post by svart on May 14, 2018 14:13:56 GMT -6
And this:  |
|
|
|
Post by svart on May 14, 2018 14:31:36 GMT -6
Too late, ordered them.
|
|
|
|
Post by matt@IAA on May 14, 2018 21:18:49 GMT -6
Where do you get your front plates printed?
|
|
